National hotline0769-82026758
National hotline0769-82026758
Plastic film water-based ink in the printing process in the production of static electricity in the inevitable, printed static electricity may cause serious printing failure: the line part of the wire around the filamentous; field part of t...[MORE+]
With the increasingly serious global environment, countries have more stringent requirements for packaging and printing, 82281aa5.jpg environmentally friendly packaging materials more favored by the market. Packaging materials, materials, w...[MORE+]
Plastic water-based ink in use to pay attention to matters: 1, Good printing equipment so that the surface temperature of the object to reach 60 degrees Celsius to 80 degrees Celsius between. Because the temperature table shows the temperat...[MORE+]
1. Special paper water-based ink is a pure water system, so do not be water-based ink and organic solvents or solvent-based ink mixed. 2. Special paper Water-based ink is generally suitable for storage at room temperature should be 5 ℃ -50...[MORE+]
The characteristics of water-based ink pigments meet the different needs of consumers for printed products. As the water-based ink resin is mostly alkali-soluble, in the selection of pigments to be used when the alkali-resistant pigments. W...[MORE+]
General four-color water-based ink is not bright, gray and the concentration is not high and other disadvantages. Used in the Indian can be achieved in the text clear, complete network, hair color strong, structured and other advantages.[MORE+]
The adhesion of the paint film is caused by the mutual gravitational force between the water-based paint and the polar group on the surface of the coated substrate, and the mutual gravitation between the polar groups is premised on the good...[MORE+]
(1) environmental protection: water-based paint without organic solvent to do thinner, so do not contain toxic chemicals. (In the past, the dispersion of organic solvents, organic solvents containing toxic substances, completely volatile cl...[MORE+]
1) surface dry determination method: the surface of the dry method of blowing cotton ball and finger touch method two. ① blowing cotton ball method: the surface of the coating gently put a cotton co...[MORE+]
1, the market environment downturn. Large environment, mainly for the market weakness and production costs surge, these unexpected situation for many paint industry people unexpected, some small and medium enterprises in order to stay in th...[MORE+]
Metal paint defoamers are organic polyether ester compounds, mineral oil, alcohol complex products, refined through a special process. With self-emulsification, easy to disperse, versatility, defoaming good, foam suppression lasting perform...[MORE+]
Powder coatings are truly environmentally friendly and high-performance coatings for the use of wooden furniture, especially in the field of MDF technology and technology is very skilled, but the intensity of publicity is not enough, not fo...[MORE+]
First, due to the interests of the reasons and the low cost of illegal reasons, likely to cause illegal addition and use of non-environmentally friendly materials and so on, even if the investigation, but also because of relatively low cost...[MORE+]
1. For the yin and yang angle, root, floor drain and other details of the node parts, to do wiping the octagonal or wiping fin detail. 2. Grass-roots to be solid, smooth, no sand, no hollowing, no cracks, for the grass-roots floating slurry...[MORE+]
Water-based resin coating with matting agent can be divided into organic matting agent and inorganic matting agent two categories. Inorganic matting agent has synthetic silica, kaolin, diatomaceous earth and so on. Organic matting agent is ...[MORE+]
In recent years, water-based industrial paint development is very rapid, has gradually replaced the solvent-based industrial paint. Water-based industrial paint, although its performance is less than solvent-based industrial paint, but its ...[MORE+]
The reasons for the peeling of the coating can be divided into two broad categories 1. The adhesion between the coating and the substrate or coating is lost. 2. A single coating inside the loss of polymerization force.[MORE+]
In the anti-corrosion coating during the spraying process sometimes there will be sagging phenomenon, or called tears or draining. The coating is locally thickened and appears to be in a vertical state due to gravity, only on the surface wh...[MORE+]
Paint is unknown secret - color determines safety. People for the pursuit of paint gradually from the basic performance to meet, began to gradually toward the aesthetic and performance changes in the direction of mergers. Of course, the pur...[MORE+]
Waterborne epoxy resin refers to a stable dispersion in which the epoxy resin is dispersed in the form of particles or droplets in a dispersion medium containing water as a continuous phase. Room temperature curing of waterborne epoxy resin...[MORE+]
National hotline0769 - 82026758
WeChat public number
